The latest in Airsoft battery technology. Li-Fe has a longer life cycle, as well as better thermal performance, (good performance in high and low temperature) than a Li-Po battery does. During use in airsoft guns, thermal stability is very important, and many batteries can get too hot to safely use.
The 9.9 Li-Fe battery also strikes a perfect balance for high performance in AEGs below 1 joule energy output. For most standard Airsoft guns, an 11.1V battery has too high a voltage for the motors and the gears and can potentially damage the gun. A 9.9V Li-Fe has perfect voltage for high performance Airsoft guns while maintaining a rapid rate of fire. This battery is fitted with T-Plug connectors for more efficient power transfer.

Important: A Li-Fe charger must be used, we recommend following the Auto-stop LiPo LiFe EU version or UK version.

Battery specs:

• Configuration: 3 split-cell.
• Fitted with T-Plug connectors
• Voltage: 9.9V.
• Capacity : 1000mAh.
• Comes with align balance connector.
• Dimensions: 126mm x 20mm x 6.5mm per cell
• Size compatible with mini-type batteries.
• This pack is ideal for M90 to M120 upgrades.
• Replaces an 8.4V to 9.6V NiMH pack.
• Ultra-advanced Li-Fe battery technology.

To prolong the life of a Li-Fe battery: 

• Never completely discharge the battery. 
• Stop using the battery the moment you hear the Rate of Fire goes down.
• IMPORTANT: You must use a Li-Fe charger, no exceptions.

WARNINGS

Only use approved LiFe chargers and never use a NiMH or NiCd charger to charge LiFe

• Do not pierce the battery
• Do not disassemble the battery
• Do not short-circuit the battery terminals
• Do not connect the battery directly to an electrical outlet
• Do not strike or throw the battery against hard surfaces
• Do not immerse the battery in water or seawater
• Always disconnect the battery immediately after use, charging or discharging and keep the battery in a cool, dry environment during standby periods
• Do not use, throw or leave the battery near heat source such as fire or heater
• Do not dispose of the battery in fire or heat
• The battery should not be charged with more than a current of 1C (e.g. a 1200 mAh battery should be charged with 1.2 A (1200 mA)). Charging with higher currents can potentially damage battery cells or even lead to overheating or other serious failures
• Stop charging immediately if temperature exceeds 45°C
• Stop using battery if temperature exceeds 60°C
• Never leave LiFe batteries charging unattended
• Always monitor the charging process of your LiFe batteries so that you can react immediately to any potential problems
• If your LiFe batteries start to balloon or swell up, discontinue charging/discharging/usage
• Before and after use of your LiFe batteries, inspect them to ensure that there is no physical damage or swelling as those are signs of imminent failure
• Read all instructions on the batteries, box & packaging before use. ActionSportGames recommend the use of a protective ASG battery charging bag (item #17544) when charging your LiFe batteries. Always use an ActionSportGames LiFe battery charger, when charging your ActionSportGames LiFe batteries. ActionSportGames can’t recommend use of any third party battery chargers with our LiFe batteries and ActionSportGames assumes no liability for using any third party battery chargers with our LiFe batteries.
• Never completely discharge your LiFe battery. Stop immediately when you register a drop in power or rate of fire

Specification